Milwaukee Tools

i use a pneumatic version at work all the time to cut out switch openings. but i really can't justify the cordless version. i would highly recommend trying one of the cheapo $30 pneumatic versions first.

i don't think these variations are large enough width to be doing lawn mower blades very efficiently. though i usually just use an angle grinder and flap disc

 

I also use a grinder and flap disc but in a special jig to keep it super accurate. I have a little OCD.

 

i've never taken a picture of mine, lol.

i usually just do it by hand, and then balance it in the air on a screwdriver shaft.

 

I just took the picture to show the edge profile. Lol
These are cleaned, painted ,sharpened and ready for next summer.

 

That’s the exact reason I went for the Bandfile. I run a mulch kit year round on my 54D and the blades do not have a totally straight edge. The blades have a curved section that lifts the cuttings into the deck for further processing and they are impossible to sharpen on a grinder or a wide wheel. The Bandfile is the perfect solution and with an aggressive grit is very efficient. I’m also a hobby welder and plan on using it to clean up welds that a flap disc can’t reach. Also no air hose to drag around.

 

Where are these available, so I could tell my friend?

 

https://www.etsy.com/shop/Thrive3Dprinting

 

Merry Christmas Mark!!

 

• 
  RATE & REVIEW
  YOUR HOME DEPOT PURCHASE
  We hope you're enjoying your recent purchase. Because you have shopped both online and in-store, we would appreciate your opinion on your recent in-store purchase. Your experience can help other customers.
  
  
  

So I get an email today for something I bought yesterday and paid cash for from HD...WTF

• 
  

 

In-store facial recognition based on previous purchases? I’m interested in the actual answer.

 

home depot self-checkout i believe has cameras in the registers. i know 3/4's of everywhere else with self-checkout does...

 

They definitely do. That’s why I was thinking it’s facial recognition. I have a buddy who does AI recognition software so I’ll ask next time I see him.

 

Was there a link at the bottom of the email, similar to an “unsubscribe” link, that had an option like “I didn’t purchase this”? This would be consistent with AI and helping it learn.

 

Did you choose to email or print your receipt at checkout?

 

Military discount?

 

Good question. Basically, did you provide any personally identifiable info? Or cash and carry?

 

Just used up all my HD gift cards on some essentials. Nothing pic worthy. Combo of online and in store.

T20, T25 and T30 Torx Bits - 3.5"

Track Saw Blade (I hit a buried screw recently)

8 1/4" 24 tooth table saw blade
Mutil-Tool blade assortment
Jig Saw Blades
Orbital Sandpaper (various grits)
M12 5.0 battery