60/40 rear seat alignment.

Is this normal?

The left rear seat is 3/4 of an inch forward of the right seat.

 

Dumb question but is the seat bottom completely down? I know the bottoms are bolted down. Not sure how much play there is but maybe look into the rear seat delete threads for some photos?

 

Yes, both seats are down. Ive checked and there is no adjustment.

 

Major rear end collision/hit to left rear corner?? The magic computer frame machines straightened out the frame but they forgot to apply the necessary tweak(s) to the bed, floor pan and left rear seat bottom. Maybe the truck dropped off the end of the car carrier ramp from a few feet up that wasn't lowered all the way to the pavement when they backed it off to deliver it? A new bumper can hide a lot. Or might just be missing a few of the bolts that mount it to the floor.

Just sayin'.

 

Nothing on carfax, and nothing visible.

 

i've never looked close enough to notice. could even be the way the cover stretched when moving one of the seats...

 

I will take a look at how the covers are positioned. I have literally taken everything apart that can come apart and I can't find any reason for it.

 

Do the seats move when the back is adjusted?

 

Not how my 23 is. Its currently piled full of my bullshit, but still absolutely the type thing Id notice.

 

Sorry, I don't follow that?

 

Not a Tacoma PickUp, but maybe something like this could throw the seat-cushion off a little...? Look for over-spray on the inside of the rims: They always forget to wipe that down. YMMV

 

Does the bottom cushion meet the back cushion like normal or is there a 3/4 bigger gap there too?

 

clearly, his truck is totaled. there's no better explanation.

i'll be by later on this week to collect it for scrap. given the obvious extent of the damage, best i can do is $3.50.

 

I think it was that fat girl I picked up hitchhiking.

 

One of the L brackets that holds your 60% rear seat in place is slightly bent. Same thing happened to my truck because I had the rear seats folded down and was sitting on them while installing an aftermarket 3rd brake light

 

Thanks! Let me check that

 

Np let me know if you find a good way to correct it, i've been ignoring it for 6mo

 

I checked and that is not the issue. I am going to be pulling both of the seats and brackets out and doing a meticulous comparison.

 

Could be a mismatched from different Toyota rear seat inventories during build