Help Please.

2002 Ext Cab I replaced DR side door handle while waiting on a few new door attachments.
Working fine with window/door connections with connections hanging. Put on interior panel and no power to my window and lock.
Guesses?

 

interior door panel or the drivers kick panel? door panel, you probably yanked a connection loose or the window knocked it out. kick panel could be the ground came loose.

 

POWER WINDOW CONTROL SYSTEM
Power window does not operate.
1. ECU–IG fuse
2. Ignition switch
3. Power window master switch
4. Power window control switch
5. Power main relay
6. Body ECU
7. Wire harness BE–10 BE–10 BE–48 BE–48 BE–48 –
”One touch power window system” does not operate.
1. Power window master switch BE–48
Only one window glass does not move.
1. Power window master switch
2. Power window control switch
3. Power window motor
4. Wire harness BE–48 BE–48 BE–48 –
”Window lock system” does not operate.
1. Power window master switch BE–48
Illumination does not light up.
1. Power window master switch BE–48

 

POWER DOOR LOCK CONTROL SYSTEM
”Door lock control system” does not operate. (All)
1. ECU–IG fuse
2. DOME fuse
3. Body ECU
4. Wire harness
5. Other parts BE–10 BE–10 DI–765 – –
Malfunction in door lock / unlock. (Using door manual switch.)
1. Door lock control switch
2. Wire harness
3. Other parts BE–54 – –
Malfunction in door lock / unlock. (Using door manual switch and key.)
1. Wire harness
2. Other parts – –
Malfunction in door lock / unlock. (Using key.)
1. Door key lock and unlock warning switch
2. Door unlock detection switch
3. Wire harness
4. Other parts BE–54 – –
Fault in 2 – operation unlock function of driver’s side door key lock and unlock switch.
1. Door key lock and unlock warning switch
2. Door unlock detection switch
3. Wire harness
4. Other parts BE–54 – –
Fault in key confine prevention operation.
1. Door unlock detection switch
2. Door courtesy switch
3. Door lock control switch
4. Wire harness
5. Other parts BE–54 BE–24 BE–54 – –
Only one door lock does not operate.
1. Door lock motor
2. Wire harness

 

I have the kick panel off cause I was trying to check the fuses and the dang mini fuses kept falling and getting stuck under the kick panel.
Anyways, my pwer mirror and speakers work. The window when working caught on something briefly while powering it down. I am about as sharp as a marshmallow when it comes to electricity, I am thinking I pulled something loose?
Thank you for your advice.

 

Holy smokes, you are entirely different knowledge level than I.

 

whats the most common answer among all those listed? Wire harness

 

Thank you

 

@slodoug cool breakdown! So what do you think about this problem.
01, specs in profile, (drivers door lock only) will not do anything POWERED with inside button. But will lock or unlock all the other doors with button only, not key turn.
This started when my Gulf states Toyota dealer installed in 2001 alarm/keyless entry main module fried out- smoked. Even With module plugged or removed it still has the same symptoms. Anybody, Any thoughts or suggestions would be greatly appreciated, thanks. I've had problem a year, I have been just pulling pushing lock knob to secure.

 

best to start your own thread but sounds like the module may have fried the actuator on that door. flip the drivers/passengers connectors on the door panel and see if they work on it just to eliminate the switch as a possibility.

 

My bad, I did thread jack. Sorry bout That. Thanks for the info. I'll start there. Happy new year!