Shop Time w/T.W. Friends

@308savage
Happy birthday

 

Happy birthday, @308savage!

 

Life is good is more important, be happy and enjoy my friend

 

Morning shop

Today is a big day, could be good could be bad. I'm planning to attempt making bratwurst corn dogs.

 

Checking in for our flight tomorrow and I'm stuck in a loop on Delta's site.

One page says that one person "needs to complete their FlyReady travel requirements before they can check in".

The other page says "All passengers are FlyReady".

But it still won't let me check them in.

I. Don't. Like. Travel. Complications. Doubly so when it's international.

 

Well got the part in and no work.
Went in to diagnostic mode and valves opened and work, got down to drain sensors and prepared to check the drain pump. Well we had towels and towels and then more towels how did it hold so much with an empty tank. But dog assistant had to test it out.found this guy stuck in the drain motor son then says let’s test it before we put it back together, I agreed that would be great but getting in to the drain we took all the power and controls off, so we had to put it all back together and ran a test wash , both of us sat in front of it watching for leaks like watching a old tv. I worked
Dam thing is a pain looks we’ll bely on the out side inside not much

 

Nothing feels better than when your effort got rewarded! Good job!

 

Happy birthday @308savage

 

For reference, this is what google says they should look like

 

I got the Super Duty's oil changed this week. The next time should be easier, as I put a Fumota valve in place of the drain plug. I also added magnets to the outside of the oil filter. I was going to use some Kydex to glue the magnets too but I couldn't find my stash. I have to order some more. I tried using heat shrink tube to wrap them but that didn't work as desired. So for now, they are individually stuck on the side in groups of three.

 

Redid the burner in a cooker for a friend. It had one control valve and the burner was all one. He wanted double burners with a control for each.

 

The fan in the VW only worked on high. Looked online and it’s a common problem for the resistor under the glovebox to go out and only work on high.

Local auto parts store, $77, Amazon $15

It blows on all levels now.





Old one.

 

the Toyota/VW conation...

 

Brats are in the oven. Once they cook ill make batter and we'll see how they turn out. Hopefully as pretty as google says.. but I doubt it

 

miss my 7.3's

 

2X
Happy birthday @308savage

I hope you get to something for you today!

 

Nice!