Tight steering

I recently got a spacer lift installed, 2” front 3” rear. I did supply the parts, 1 1/4” wheel spacers and new UCA’s. Since the lift was put it I noticed that the steering is super tight wish is nice but the steering wheel does not return back to center freely, and yes, I had an alignment done. Has anyone else experienced this or have any thoughts? Ty!

 

I would take it back to the alignment shop and have them check it out.

 

Your alignment may be good but your tie rod ends are offset in one direction or the other. Take it back to the alignment shop and have them adjust the tie rods an equal amount in whichever direction it takes to center the steering wheel.

 

Before you spend any more money, post your alignment sheet.

 

Got it thanks guys. I didn’t think about the tie rod ends.

 

The caster needs to be addressed correctly.
https://www.motor1.com/news/299470/why-front-wheels-return-center/