1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

I need help with my tacos suspension

Discussion in '3rd Gen. Tacomas (2016-2023)' started by LilTacoMan, Jan 29, 2025.

  1. Jan 29, 2025 at 3:12 AM
    #1
    LilTacoMan

    LilTacoMan [OP] New Member

    Joined:
    Jan 29, 2025
    Member:
    #464982
    Messages:
    1
    Gender:
    Male
    Hello fellas this might be a super dumb question to ask. So i got a leveling kit a couple years back for my 18 Tacoma. 3 inch spacer in the front and a 2 inch block in the rear. Recently I’ve realized that my Tacoma is super rough over bumpy roads like a jackhammer having me slightly bouncing around in the cab. So I’ve decided that it might be time to replace my shocks/struts. For the rear i going with the 0-2inch rough country M1 monotube shocks. But the front is where I’m having issues i can’t decide if i should just replace the shock or the whole assembly. The springs look fine but i was wondering would it affect them if i went with a longer shock.rough country unfortunately doesn’t sell separate shocks for the front so i was looking at the 5100s but they only go up to 2inches. So im in a pickle. Please help

    IMG_8201.jpg
     

Products Discussed in

To Top