1st timer & e lock question

howdy all yall
was told on facebook 2nd gen tacoma yadda yadda to ask here about the premade e lcoker harness for $200.

short story is
2011 Sport TRD
bent the passenger axle backwatds
found a axle on marketplace and picked up the front and rear axles plus a rack n pinion for $1000 (130K miles on them) Guy is putting straight axles on his Taco. will be sweet when he finishes it.

Ok so I have 4wd and was hoping that I could buy the switch for the dash and find harness tucked up somewhere to plug into the elocker axle. Apparently not so

I tried t do a search on here for a kit and I am not searching the right wordage to find a premade harness

Thank you

 

Welcome aboard Brice. Here’s one I found that might work

https://www.yotamasters.com/product...PLJAKRboHomvhwUSs792MRwaVnD8gEdhoCYvAQAvD_BwE

 

You can wire it up with 14 or 16/6 cable and a DPDT switch for about $40

 

https://www.chilkatdesigns.com/product-page/toyota-8-e-locker-conversion
Cable operated function, locker can be used in 2wd,4hi and 4low, and no need for any wiring.

 

This is what I did on my old 94 pickup. Worked well.

 

thanks guys
I decided to do the harness kit. It will be easier for me to plug and play at this time. need my truck back on the road in a week.