Pioneer GEX-P920XM sat radio install

So I installed my Z130bt last weekend, this weekend its the XM receiver!! I did not realize that the receiver was as large as it is, any suggestions for the best place for the install??

 

i don't know what the size difference between the HD radio box and xm radio but i put mine in the passeneger side storage compartment. i used velcro to hold it in place ran the cables under the door sill. if you would like a picture i can take a couple. not sure if you are 1st gen or 2nd but im 1st gen

 

Its a 2nd gen Dbl cab, thinking about installing in the storage compartment, either under the rear seats or behind the rear seats....tks for the info though...

 

There's all kinds of dead space underneath your center console either behind or next to the shifter on mine. I just got done putting my double din Kenwood nav in. I know where there's not space, anywhere in the dash lol. Its damned tight in there, I could barely get my wiring stuffed in.

 

I installed my Pioneer interface and the Sirius box on the right side behind the plastic panel by your feet. I took off the panel and took out the glove box and was able to tuck it back up there using velcro 3" wide strips from Home Depot. I can get some pics later if ya need more detail. It has been there for about a year now.

 

Everything installed and working perfect!! Ended up installing the XM receiver on the passenger side under the rear storage compartment, same place as oem sat tuner goes. Ran my Ipod cable from the HU under the center console, perfect!!! Gave me a chance to clean all the centre console pieces from coffee and dog hair!!! Have a brand new AFE CAI SI that I bought online on black Friday to install, was going to sell it, but though screw it...throw it in!!! Really happy with the z130bt, GPS is good to go and the BT works great!!! Now I'am thinking new speakers and a sub behind the rear seats....never ending man!!!! Thanks to everybody for help and offers for pics....good to go!!!!