Adapting ES Poly Cab Bushings for the 3rd Gen

This is a project I did a while ago but never posted about. I stumbled upon my file again recently and thought I'd share it in case someone else wanted to do this. I was mid bushing install when I realized that the energy suspension cab mount bushing kit is for 2nd gens only. If you want to do it for 3rd gens you need a different plate. I had a set made pretty cheaply shipped to my door.

I'll link to the DXF file for the plate you need (I'd recommend sendcutsend.com if you don't have a lasercutter). I did mine out of 0.250" 304 stainless so I wouldn't have to worry about corrosion.

DXF:
https://drive.google.com/file/d/1QriI6zC8g_IXduK-KzkyK5UmZf1REr9P/view?usp=sharing

Energy Suspension Kit:
https://www.energysuspensionparts.c...4cVv0xCOTHCVGUNXlIih6OrxrXo-3V6BoCvpwQAvD_BwE


Top: New 3G plate, Middle: ES 2G plate, Bottom: Factory

 

I'm new to the Taco world, why do people not talk about body lifts much?