FS: King Shocks, Hammer Hangers, Rear Bumper, etc.

Have a few items for sale. These are all taken off from my 2nd gen Tacoma. They will probably fit 3rd gens, but you will have to check for yourself. These are for local pickup only. I'm located in Huntington Beach, Ca, and willing to drive about 25 miles to meet you. I can accept payment in cash or Zelle.

Please note that I'm not going to hold the parts for anyone for an extended amount of time. The first person to contact me and pay my asking price will get the parts.

Please PM me or post here if you have any questions. I typically work 7am-6pm Mon-Fri so I might not be able to respond until the night.

Pictures of the items are attached. More pictures are here.

Front and Rear King Shocks + Dirt King UCA - $2600
I want to sell these together to make it easier. This will be a great mid-travel setup for someone. I recommend the person buying these to get the shocks rebuilt. I've had them on my truck for maybe 30k miles before they were taken off. The price includes:
- King Shocks 2.5 Front coiler overs, extended length, with compression adjuster, and 700lbs springs. I'll include new in the box 600lbs springs, which I never got around to swap.
- King Shocks 2.5 Rear socks, extended length, with compression adjuster.
- Dirt King Upper Control Arms. This is their boxed upper control arm with bushings.



Archive Garage Hammer Hangers + OME Dakar Leaf Springs - $900
I want to sell these together. So I am not going to split these up. The following parts are included:
- Archive Garage Hammer Hangers, high clearance cross tube, and poly bushings
- OME Dakar CS047R leaf spring with the additional leaf (for increased capacity and height), shim, u-bolts flip kit with Superbumps.



SOS Offroad Rear Bumper - $600
Purchased this back in 2016. I can't find all the details for this bumper. It was made by SOS Offroad Concepts, which appears to be out of business now. It is a standard rear bumper. It has dual swing outs. One swing out is a tire carrier, and the other is a dual jerry can holder. The swing outs worked fine for a few years, but then the bolt in one of the hinges seized and SOS was not very helpful on how to replace the hinge assembly (i.e. the bolt, bearing, etc.). I wasn't a fan of swing outs anyway so I just took them off. The swing outs are included, but please be aware that you'll need to figure out how to get them to work properly again. I think all you need is 1" ID bearings (not tapered) pressed into the hinge to make it work.

The bumper is on my truck at the moment, because I am waiting for delivery of my new high clearance bumper. Plus it's holding my license plate. I'll take it off as soon as someone agrees to purchase it, or when I get and install my new bumper.

 

OEM u bolts and bump stops should work fine with the leaf packs. if you will split the u bolts+ superbump setup let me know.
also interested in just the rear kings as I have fronts already

 

Interested in the Archive Garage cross tube, if you're willing to split

 

Also interested if you're willing to split.

I would take the Hangers with Cross Tube, U Bolt Flip and Superbumps.

 

Dm