SOLD Scangauge II - $100 shipped

Scangauge two in good condition, works as it should. It's already programmed with the torque converter and pan temp for the transmission. Also included is a 3D printed mount for the steering column. I modified the mount so I can plug the scangauge in from the rear and used double sided tape to hold it to the mount.

The connector on the cable where it plugs into the scangauge is a little cracked but it still stays in 99% of the time. The only time I had it unplug was when I bumped it while cleaning. A replacement cable can be ordered for $20 if desired from here.


$100 shipped to the lower 48. Can ship elsewhere if needed for extra money.

 

What’s the firmware version?

https://www.scangauge.com.au/scangauge-ii-firmware-update

 

I’ll check and get back to you but it’s certainly not up to date. This unit was purchased October 2020.

 

Turns out it is the most up to date, 4.53.

 

Bump

 

SOLD