Aftermarket driveshaft

My driveshaft on my truck is a little worse for wear, I have replaced u joints and carrier bearing. But my slip yoke clunks and is sloppy I grease it and it temporarily stops clunking.I am wondering if anyone sells a decent aftermarket or custom driveshaft.

 

For driveshafts, I go to my local driveline shop and have them make them or repair. Fleet Pride is my local go to. They are nationwide.

 

How much do they charge?

 

A lot less than buying a new OEM. It’s been a while but the last one I had made for a classic car was in the $200 range.

 

Ok that will probably do that in the future.

 

Has anyone used this driveshaft https://www.wellbuilt.com/product/431-59474/

 

I would either buy one used, from Rockauto, or just have a driveline shop replace the bad splined section.

 

Anyone have experience with performance driveline?

 

+1 for your local driveline shop. Been there. These guys do driveshafts day in day out 365, if you've got one even semi-local, go that route.