Ghost Ship Yard Sale- SoCal

Cleaning out my garage and I have a bunch of stuff that I've accumulated over the years. Project leftovers, stuff that I've acquired from horse-trading and just general hoarding means a bunch of random shit. I'll likely be listing more stuff as I clean out random corners of the shop, but let me know if you're interested.
All prices are listed as pickup in the SFV, but I work in the South Bay and can meet there as well. I'm not opposed to shipping stuff, but actual shipping cost is on you.

 

.

 

Generic 1” hubcentric wheel spacers. $100 for the set of 4. Brand new, never mounted.

These are NOT the more common 1.25” Spidertrax. Depending on your wheels, the factory studs may need to be ground down slightly.



Fox 13” 600lb 3” springs. $60
These came off my fox shocks and have about 40k miles on them. Slight scuffs in the finish but plenty of life left.


King remote reservoir mount. $50
These are for a custom application so not a direct bolt-on for Tacomas. I forget the original purpose for these, but I remember keeping them because I thought I could use them for… something?




Front vertical RR mounts- $70
Can’t remember if these are Fox or Dirt King but they’re new and never mounted. Should fit all vertical RRs- King, Icon, Fox, etc…


ARB CKSA12- $150
This is the smallest compressor that ARB makes and is meant for actuating an air locker- not inflating truck tires. I didn’t read the details when I bought it from someone else and eventually thought I could make a portable air supply for my bike but lost interest. The seller mentioned he did use it for his tires but it took forever to fill them up so use it as you wish. All the wiring and stitch is included but you’ll need another air filter since I broke it in storage.


Morimoto 20” XTorch lightbar. $150.
Morimoto doesn’t make these anymore but I always liked the black housing vs lightbar that the face is all chrome reflectors. It was marketed as a 20” light but the bar itself actually measures about 18.5” and the mounting tabs are 20” center to center. Good for front a bumper or lower valance.


Caliraised 20” lightbar. $70
Nothing special here- cosmetically 8.5/10 but everything works.

 

Caliraised pods with Rigid lens covers $60 for the pair.
Some slight fading on the housing but everything works.


Caliraised side-shooter pods with rigid lens covers. $70.
Same as above.

CaliRaised spot pods- $50



Caliraised AMBER pods- $60
These have amber LED chips in them for a true amber light, not those white lights with yellow lenses that give you a puke-color. The housings are dusty in the pic from storage.


Generic flush-mount LEDs- $30
New, never used.



Front Runner hi-lift jack mount- $90
I think you can mount this to Prinsu or other extruded roof racks as well, but I never tried.


Generic single flush-mount LED. Free if you buy anything else. New, never used.




Icon sway bar relocate- $20.
I have 2 sets of these one is new, the other was used for mock up.


Pelfreybilt blank accessory tray- $70
Drill your own holes for stuff.


End-link removal tool -$15
Rented a new one from Autozone and never returned it. I used it once.


Bussman Fuse box. $60 if you take it as is, $200 if you want me to completely wire it for you with fuses, relays, and appropriate leads for power, ground and accessories.

 

There’s going to be more, this is just one box of many in my shop. All prices are negotiable- for what it’s worth, I didn’t compare to Amazon prices so I might be off by a little or a lot on a few of these.

 

Bump

 

What are the Measurements on the Blank Accessory Tray?

 

I’m interested in the $70 option of the CaliRaised pods with lens cover, shipping to SoCal.

 

How much for all the pods and flush mounted lights? I am in Culver City but could meet somewhere near the southbay.

 

Just getting back to TW after some time away. The tray measurements are below. It should fit standard 2-3rd gen AT models in the traditional location.

 

I’m in SoCal (818) but if you want them shipped, they should fit in a medium flat rate box so factor that into the price and I can get them out to you.

 

I’m responding to all the individual replies first but if they pass, I’ll see about getting you a bundle price for the whole deal.

 

Sounds good. I’m in Culver City, but headed to the valley tomorrow morning to help a buddy out... I can meet with you any time after 8:30a, if that works for you.

 

Sending a PM.