Hazard feed to key fob

My wireless entry has the option to flash my lights when I press it but I did not bother to hook it up. I'd now like to feed that wire to the hazard light connector but not sure which wire. Anyone done this on a 2002? I'm thinking wire #9?

 

I can't remember which ones, but I recall connecting to 2 for right and left.

 

well, its not 9 nor 7. 9 did nothing, 7 flashed my warning dash lights and ignition tone. Im not going to F it up any more and just run a line back out to the raptor light relays. bu thanks for someone answering.

 

9 isn't going to do anything unless the Hazzard button is pressed.
And you can't just leave the hazards button pressed. The hazards would be on all the time.

You have to tie in to 5 and 6.
As they run to the flashers with out going through the Hazzard or turn signal switch.

Not worth the trouble to me.

Just wire them to the raptor lights and prevent future problems.

 

i have so many relays under my hood that I accidentally wired them to my fog lights, which is even better as they are much brighter than the grill leds.