3rd gen vibration (still)

I’ve got a 2016 trd sport, 2 inch lift, 33s, kdmax/yota works tune, carven exhaust, ecgs bushing is installed. Theres a vibration from the front that’s a steady whirring above 35mph that I also feel pretty intensely if I hit the brakes I’ve come to the conclusion it might be the vacuum pump or a caliper sticking. My cv’s, wheel hubs, rotors, and pads are new. I do notice with the hood open that the engine does vibration a lot more then when I got so my other thought was engine/ transmission mounts at this point I’ve been looking into new trucks because this vibration is driving me nuts but I love the truck at the same time

 

WHen you modify a design you need to be prepared for any and all effects.

 

This truck has had these modifications since before I bought it and it has never once had these problems till recently

 

Kay, if the engine is “rocking” I’d look at the motor mounts