What Have You Done To Your 3rd Gen Today?

Put on Method MR703 in machined clear coat, switch it up from the black. 17" x 8.5" Zero offset
Cooper Discoverer AT3 LT 265/70R17

 

Congratulations. You an rixy should start a club. You have strong feelings about gas caps and cup holders by chance?

 

simmer down honey
all i said was they are removed for more CLEARANCE
you were asking why people remove them
if you like the look of them then thats fabulous
you should get a 2024 since they are 3 times a bigger on those

 

Front/rear differential and transfer case fluids all changed out today.

Also installed new front rotors and pads. Got distracted during the brake work and forgot to tighten/torque the driver side brake caliper mounting bolts. Figured it out when I went to work on the passenger side and realized I hadn't adjusted my torque wrench to the proper setting. I'm thinking next time I'll create a checklist and mark off the steps as I go so I don't have another slip up; that one could have been bad!

 

40 inch Rigid Industries Light bar installed now the fun part of wiring it up.

 

no thanks
i would not put brighter bulbs in and then block half of the light, seems kinda stupid

 

I heard about the noise too but I was going 80 on the freeway in AZ with a dust storm and it was barely noticable. I went with the regular Prinsu rack for this reason with the wind front plate and thick (what she said) weather stripping that goes in the bottom of the wind plate.

 

Went through the same situation with my body armor bumper. Went with this light bar. Bolts to the plate and shines down. Could also use those bolt leds too I'd imagine, or anything really that shines down instead of up at the camera, which is the trick.
Red Flag Robotics Universal license plate light 12V 100mA with waterproof connector and 86 in lead

$29 Red Flag Robotics Universal license plate light 12V 100mA with waterproof connector and 86 in lead

https://www.amazon.com/dp/B0DFQ7WCFP

 

Slick! Already have the DIR installed or I’d be all over this! Lookin’ good

 

I did mine in March of 2022 when I purchased your covers and went from Halogen to LED:

More pics here in post# 61

https://www.tacomaworld.com/threads/trd-sport-5-14-2021-loving-my-3rd-gen-tacoma.738836/page-4

 

Seems like a pretty good solution. I like that it shines downward away from the camera

 

If I wanted a 2024, I would have bought a 2024, my next door neighbor has a 2024 and a 2023, I am not a fan of the 2024, that is why I bought the 2023...

I had already said that I understood why they are removed for the 4x4's, and I have a rwd that never sees dirt, so why would I need to remove it...

But you keep on being you...

 

ECGS bushing swap, thanks for the recommendations. this fixed my vibration post suspension install!

 

My rear bumper step pad had a nasty gash from a trailer mishap. New oem piece installed this afternoon.

 

Welded on the marlin crawler cam tab gussets and frame braces. These things are BEEFY!!!

 

You don't use lamp shades on lamps in your house?

 

Swapped Rigid fogs with SS3 Pro. Not only they look better, but perform better. Really happy with it.

 

Looks killer!

 

they are for decoration ladybug

 

Dude those quad LED look so sick. I need to upgrade my OEM ones. So many options. The square ones were nice too but those rounds, DOPE.