TRD beadlock wheels are still in production, new part number

Nice to see the center caps are once again included!

 

How much were they with the discount?

 

???

 

He did not say he got a discount on his first and only Tacoma Wold post.

 

Anyone found black center caps? I'm looking to buy a truck that already has these rims installed but thinking about pulling off the wheel ring (or painting it black) and installing black center caps.

 

I painted both my caps and rings. Rattlecan flat black auto paint from Canadian Tire.
I theory, these are my wheels and tires for hunting season, so the less reflection the better.

Decent photo in my avatar.

 

I’d be interested in the caps! Try FN wheel
https://www.fnwheels.com/store/product/pscp23dbk1-cap-matte-black/

 

This is the way.

 

Those look great, will likely do the same if I buy this truck.

 

I'll let you know if I buy the truck and decide to ditch the caps. Thanks!

 

Anyone got some lug nuts laying around they'd like to sell? I'm missing a lug nut on each wheel, so I'm looking for either 4 of standard lugs or 4 of the locking lugs and a key.

Locks and key: part number PTR27-34061

Lugs and spline (I already have 1 spline tool) part number PTR27-34060

 

I'll have to check my garage, I may have some.

 

Looks like someone either tried to steal one of these in the past or a tire tech didn’t know what they were doing and damaged it.

I found some plain black caps at fnwheels.com but they are out of stock until late March.

Also found some black with TRD red letters on Etsy and asking the seller if they can make the letters grey or silver.

 

I painted my rings today. I'm going to hold off installing them until I get some black hardware and new center caps. I actually like the look of the wheel without the rings installed, but technically I bought this truck for my son and he wanted the rings black and installed. What does he know?!? LOL

 

Temporary solution!

I had my wife cut me a 4.25” diameter piece of black vinyl and used that as an overlay. There are a few air bubbles that will likely come out but this good for now. You can see a bit of silver already the cap where I cut the vinyl flush to the face but it’s good for now until I find a better solution.

 

They are nice just take your time with the R, red or gray trd would look good over a black vinyl cap

 

Any chance you were able to locate some lug nuts or wheel locks?

Also, does anyone have just 1 center cap they are willing to sell?

 

7 left in stock ...

https://parts.elmhursttoyota.com/oe...JVz6IdGZazryZL36ch1rDKvjMQe90T1jLAWcgCA7TVOuf

part numbers for lugs and locks are in post 1 of this thread

 

Thanks, I've got the part numbers I was just quoting the post from "dome" to see if he was able to locate any old lug nuts in his garage. I'll send him a direct PM.

 

Finally got my set of TRD Baja wheels! Bought some black TRD wheels!!!I bought everything for the cheapest I could find.

Items bought
-wheels
-center caps
-TRD 24pc complete set(lug,lock,splinedrive,key)
-TPMS sensors

Total spent (without shipping) $1,433.92

Total spent (with shipping) $1,584.71

Break down
From Bama whole sale:
Taco Alloy wheel PTR56-35220-F2 4x $295.63
Wheel lock TRD 24 Pc set PTR2735100 $114.40

From Toyota Fnashua:
Tacoma center caps PT280-35220-G0 4x $20.70

Amazo:
Moresensor signature series 315Mhz TPMs sensor $54.11

(Wheels from Bama came with ring & hardware)