Need rear drums.

Using the two way valve (its just open with a cap, not really a valve), the threaded union at the axle and thick wall silicone tubing (like it because its a little more flexible that gas line but both will work. Located in behind the driver side tail light using an existing bolt to hold in place. Was just one of those I am under here anyway things and had the parts at hand.Sole reason for mod was the issue where the factory breather gets blocked and forces the lube out the axle seals and ruins the rear brakes. And since it was like an additional 5 minutes work i did the relocate to the tail light. Except for maybe a deep puddle have never been up to water deeper that the center cap in the wheels and never plan on fording anything deeper.