1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

9.5k badland winch in an ARB Bullbar?

Discussion in '1st Gen. Tacomas (1995-2004)' started by ToyotaDriver, Mar 19, 2025.

  1. Mar 19, 2025 at 5:20 PM
    #1
    ToyotaDriver

    ToyotaDriver [OP] Well-Known Member

    Joined:
    Nov 23, 2017
    Member:
    #236721
    Messages:
    886
    Gender:
    Male
    First Name:
    Jason
    Idaho
    Vehicle:
    ‘04 V6 5 Speed SR5 TRD downward spiraling project, ‘15 V6 6speed TRD daily
    The 1st Gen: All pro 3” lift (650 lbs coils, expedition rears with bilstiens),Timbren rear bumpstops, ubolt flip, diff drop, carrier bearing drop, 33’s on beadlocks ,ARB Bumper, winch, hand throttle, ARE canopy, roof bars, poly bushings all around minus the body mounts. The 2nd Gen: Leveling kit, roll up tonneau cover. 265/75/16’s
    It’s possible, I did it. Let me know if you want pictures and a write up. I replaced my m8000 warn after I blew it up. (Edit) This was NOT plug and play. It took me a while and I actually had to use some of the parts off of my M8000 winch ($30ish worth of parts new) to make it fit. Much cheaper option if you have an ARB and don’t want to spend $1000 on a winch
     

Products Discussed in

To Top