1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Downstream Cat Removal/CEL fix

Discussion in '4 Cylinder' started by Knucklehead_Taco, Mar 20, 2025.

  1. Mar 20, 2025 at 1:49 PM
    #1
    Knucklehead_Taco

    Knucklehead_Taco [OP] You said cut the "BLUE" wire righ…

    Joined:
    Aug 11, 2021
    Member:
    #373948
    Messages:
    38
    Gender:
    Male
    California (Left Coast)
    Vehicle:
    2009 Tacoma 4x4 TRD Off-Road (4 door Crew Cab)
    4 inch lift - 20" Wheels M/T Tires - 4.0L VVTi V6 -
    This is a public service announcement for anyone who wants to or has removed the downstream cats on their 2nd gen Tacoma… (2009 4.0 V6 TRD Off-Road) Removing these, at least for me, threw a CEL immediately. So after a few months of research and seeing probably 10 different ways of rigging your O2 Sensor I have found this is the best way, at least for this generation of Tacoma.

    a single resistor inline with the O2 sensor’s Blue wire worked for my rig… the coming months will tell of course and I will keep you all updated.

    Here is the link to Amazon for the resistor pack I soldered in-line (1Mohm 1/2w resistor)

    https://a.co/d/9rGAR5R

    I hope this post finds someone that can use it!
     
    Last edited: Mar 20, 2025
    kergilman, Zerksees and HondaGM like this.

Products Discussed in

To Top