AZ Classifieds

Where are you located? I’m interested in the tailgate panel.

 

North Phoenix next to desert ridge

 

Same here, I’ll take it! I’ll send you a message.

 

Sold my 2016 last weekend. Have a few bins of OEM suspension stuff as well as a full set of steel skid plates (ifs, trans and xfer case). A viair 12v compressor. Original driveshaft as well. DM if interested in any of the above. I’ll dig through bins and take pics this weekend hopefully.

 

DM'ed you!

 

Feeler for rear shocks so I can make some changes.

2.5x16” triple bypass kings. Tuned as seen below. Will do a full rebuild before sale if they go so they are fresh for the new owner. Can revalve if you like but I’d recommend against it unless the new application is drastically different.

$1500 for the pair.
https://www.instagram.com/reel/DBeYiOZSRyc/?igsh=MXVnemw1OXg2d2dhcA==

Can pull off the truck, rebuild and be packed for shipment within 48 hours if a deal is made before the end of the month.

 

I think I'm due for a shock rebuild. Anyone recommend someone in the Glendale area? They're king 2.5s

 

Expansion from my post above. Parts available that I'd like to get rid of are listed below.

OEM leaf packs
OEM rear driveshaft. Prop shaft in "new speak".
Clazzio black leather seat covers. Driver seat bottom is a little worn out.
Steel IFS skid - SOLD
Steel trans skid - SOLD
Aluminum trans skid - SOLD
Aluminum transfer case skid - SOLD

$103 Viair 88p Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)

Viair 88p - SOLD
Snatch strap and bridle strap
Lots of U Bolts
2 new cam bolts for lca's - SOLD
Total Chaos uca bushings (new)
Total Chaos uca bearing tools
OEM uca's
OEM lca (new)
OEM shocks and springs - SOLD
RotoPax fuel and water containers (1 gal)
Tailgate pad for a single MTB
5 3/4" drop hitch
ARB rapid deflator

Message if you're interested in anything.

 

I’d be interested in aluminum skids
How much you thinking ?

 

Sale currently pending. The skids are the hot item.

 

Hello,
Hate to Start a New Thread but can someone please recommend a reputable AC shop to replace the AC Refrigerant Discharge Hose? I can literally see the dye escaping through a pin hole. Any recommendations would be greatly appreciated!!!
Thanks

 

Since you're in Chandler. I've used All Start Electric and AC off Chandler Blvd and Gilbert. They rebuilt my entire AC system on my 86 Minitruck.

 

Anyone know what happened to Luis ? I swear I just seen his or his old 2nd gen in Gilbert , where ya at

what did you upgrade too ?

What's happening? Upgrade, going full size? I need to know chuck

 

Hose or hard line? I've had crazy good luck with some jb weld on a pressurized ac hard line. Like..... going on 10 yrs....

 

@05tacomabro
….On the hose!

 

You in Tucson?

 

Vail

 

We have outlining cities like Phoenix too, he's a tucsonan but likes to claim that he's not....

 

Still Sierra Vista at heart

 

I have a JD Fab Lower Arm Pivot Kit for the aluminum skidplate, 05-23 Tacomas. New in box, been sitting in my garage for a year and haven't decided to get it installed. Looking to pass it onto someone else.

New in box, unopened, looking to get $850 for it. Local pickup in Gilbert, can meet near Sky Harbor on certain weekdays.

https://jdfabrication.com/products/tacoma-05-18-lower-arm-pivots?variant=31752378876019