What Have You Done To Your 2nd Gen Tacoma Today?

Looks like GT3 seats, cool.

 

Slaps?

 

Finally mated together the twin stick transfer case and tranny with valve body upgrade. Its always sketchy to me every time i lift this much metal alloy at an eye level..

 

Absolutely. Definitely overkill for the space though, I'd probably buy a 10" sub if I didn't have this one laying around.

 

Made it to 100 thousand today in my '14 PreRunner!

 

Your a young buck! I just went to a quarter million today.

 

Generally curious is this just an FJ tcase with a twin stick kit on it?
Does this allow for H/L selection for front and rear individually, or am I thinking triple stick?

 

The VF2B (FJ Cruiser, 4Runner Trail Edition) transfer case and twin stick conversion allows you to change between 4wd-2wd and hi and lo range manually and independently. (1) stick for 4-2wd selection, (1) stick for hi-n-lo range selection

 

Went a little Molle Crazy

 

Got her back today, got her wrapped to protect from FL sunburn

 

You could get arrested for that in some states...

 

New boot goofin today! Firestone Destination A/T2 in the stock 265/70R16. Picked up an unused 2022 spare, also had Costco throw in TPMS sensors.

First time since buying the vehicle in 2023 that I've had no blinking TPMS light!!

Got a couple dumb stickers for the camper glass.

 

NICE RIG, FELLOW SURFER

 

That color is
Just curious how much did that cost?

 

From the Better Late Than Never Department: Finally got a snorkel installed! The touch screen died about three years ago. I managed to get it set to
Bluetooth so I could use SiriusXM app from phone with truck speakers. Toyota wanted over $5,000 to replace the head unit. Got one on-line for
$222.00. Looks brand new but I suspect it is from a wreck and just cleaned up nice. After looking at videos of DIY touch screen replacement
I bought the whole unit and had a real auto shop do it. Also fixed two broken switches, replace right front bumper
cladding end piece I ripped off in a ditch six years ago. Ditto for the driver side front mud flap also ripped off in a different "event." The stump guard
was dented and rusting - have no clue when that happened. They straightened and painted it. All the work / parts was under $1,900.
Good to go for another 10 years.

 

3500 out the door

 

Upgraded the Aluminium Unistrut to Galvanised Steel. Way more sturdier and doesn’t flex.
Mounted the traction boards to the side.

also had a friend help with the wiring job for the side and rear lights.

I don’t like the rear spot lights so I might swap those out for floods.

 

Recently rci full skids and locking console mod

 

New Cooper Road and Trail tires, and greased the driveshaft, including the 5th zerk.

The tires feel really good on the road so far today, quiet and giving good braking and turning even with 800lbs. of stone in the back. No off-road yet.

 

Nice cool morning to tackle the intermediate steer shaft woes. Zip ties only made mine worse. Got on toyota parts with a little sale they had goin which turned almost 300 into just over 250









Lotta hair around the old one inside. Looked like a chewbacca hairball