What Have You Done To Your 3rd Gen Today?

https://maps.app.goo.gl/14VDcsD5CK89dsW7A?g_st=com.google.maps.preview.copy several different locations, but the last was up Geneva Creek off Guanella Pass off I-70 between Georgetown and Grant Co. that was end of July last year. Lost a key fob up there somewhere! It takes over an hour to go like 7 miles and thats going down.
The the first pic and this pic was over by Montezuma
last Aug. https://maps.app.goo.gl/VEagdToaiamRGKbF9?g_st=com.google.maps.preview.copy

 

They make multiple types of items to discourage this. I personally have a mouse blocker under my hood.

 

Installed single ARB to switch pros.

Found a really solid, low profile, single ARB mount from Rodhe Fab. Sits passenger side behind air box which is what I wanted and didn’t want to spend $100+. After days of searching Google for other options other than Slee I found these guys. Local shop in Vancouver, WA so another huge plus as I saved on shipping. They specialize in Mazda/nissan hard body fab and have a random single arb compressor mount for 3rd gen Tacomas. Sold in raw steel so a couple of coats of spray paint and installed super easy into the 3 existing bolts.

https://www.rohdefab.com/shop/p/ytjj01axamjpfcvz0oojjwrwyp7n58

photo of the solo mount is off their site, the rest are mine after install. No photos of wiring, finished up too late last night.

 

By the size of their dinner I think it was probably a Squerell..... still a rodent the same

 

Never heard of these guys before, but that looks like a really cool little shop. Bracket is clean.

 

VLED's has sales all the time. The red brake light bulbs are brighter and spares are easier to get replaced under warranty.

https://www.tacomaworld.com/threads...il-light-conversion-kit.790993/#post-28319372
https://www.tacomaworld.com/threads...il-light-conversion-kit.790993/#post-28319387

Parallel parking on a busy street or signaling to take a parking spot in a parking lot while waiting for others to move and then needing to back up. It doesn't happen very often.

 

Maybe when I back in my driveway??

 

Finally got my "vision" completed...Body Armor stubby....

 

Installed the Xtrusion Overland's XO.Skeleton bed rack last week, used it to haul some 10ft long boards today. Extrusion bars are so versatile, can put tiedown points anywhere.

 

Bought mine 3 weeks ago. Gave it a clean this past weekend.

 

Man that last photo looks like heaven!

 

Morimoto BigBanger Pods added to my Prinsu rack, they're not really a friendly addition like Diode Dynamics SS5 crosslink where they provide a specific bracket for mounting to the front of the Prinsu. Morimoto doesn't have anything like that for sale, so it's just up to end user (fine by me, I'm plenty crafty).

Anyways I just added another crossbar behind the wind fairing for the pod bar to mount to. I'm currently waiting to get the pod links in (still on backorder) so each individual light is just bolted to the crossbar currently with their normal brackets, pod links will lower them down about a half inch and push them forward about a half inch as well. Either way it's 90% complete until I get the pod links in! Also decided the different lenses (four combo versus the two spot) is going to bother me in amber DRL mode so I just ordered two combo lenses so they'll all be combo lights once I get those in and swapped as well.

 

WOW, I was literally just looking at the 6 pod bigbanger bar mounting option to my sherpa rack for the past two days. Great stuff! I tested their bigbanger hxb and found it to be my favorite over baja's lp6 and Diode Dynamics ss5 pro. I am trying to figure out a way to mount them lower, so they dont sit on top of the bar but in front of it. I will see.

 

I saw your comparison on YT and was glad they came on top! Beautiful work on that test as well! I've been piecing this pod setup together for a few months, couldn't just drop the full amount on all of it at once lol.

Some guys just delete their fairing and use the pods as a fairing, but I didn't even bother trying that, I can't imagine the wind noise I'd get from that. I have it mounted pretty well and I think with the end brackets and links, it will sit nicely, I might still end up cutting my fairing to move the lights down and forward, I just wanted to get them mounted for the time being. I can always cut the fairing down the line, can't add material back to it lol. The biggest issue is that angle at which the fairing extrusion is at, that Morimoto side bracket allows for a fair amount of tilt, but not nearly as much as the fairing sits at. This way I have a secure mounting solution with its own dedicated crossbar, as you know, these pods are HEAVY (4lbs each). So you've got like 24+lbs to worry about mounting.

 

Well said I will probably end up in the same boat, I am looking at 2 interesting potential options.
1. SS5 end brackets seem to have that angle and probably sits lower and may still work with the fairing.

2. Sherpa LP4 mounting brackets

this maybe a good compromise to have it still sit on top of the bar but much lower than the morimoto's brackets. Maybe they will work with morimoto's size and hole location.

Eventually, I really want to get this look with the bigbangers.

 

Peppermint spray

 

Vleds designed and manufactured the bulbs for the meso kit until meso outsourced to china. With the cheaper price comes a cheaper product.
Plenty of people have had no issue with “meso” branded bulbs, but vleds still sells their bulbs for the meso kit. Personally, after my 3rd meso switchback burnt out in 2 years, I just bought the vleds version.
Wish I’d just gone to the source in the first place.
TBF Meso warrantied my bulbs twice no questions asked, but the bulbs are almost never in stock, just like the kits. Just fair warning

 

"Buy once, cry once." Meso seems to always have issues with having any inventory in stock which is why I went with VLEDS. After one of the red bulbs and one of the wiring harness stopped working properly I was able to get them replaced with very little hassle. So glad I went with them right off the bat.

 

Not at all brother. I’ve had no issues goin on 4 years now.

 

Your truck looks better and better every time you post a pic! Really love your light set up.

Your build actually inspired me to get the backlit diode dynamics ditch lights instead of the non backlit ones.