Wheel bearing

I have a snd gen tacoma with a bad front wheel bearing does anyone have any recommendations for an aftermarket replacement? Thanks.

 

https://www.tacomaworld.com/threads...-service-oe-nsk.537080/page-111#post-30465145

 

I just did my fronts. Rock auto has SKF hub and bearing full replacements. So far they have been great. Premium replacements.

Heres the link.
https://www.rockauto.com/en/moreinf...0BY5fnf+hsM4Ckf9M9C8euAwCHNYN7I/pavZJh4YTVw==

 

I just installed these as well. Only 750 miles so far but no complaints, seem to be good quality especially for the price from rock auto. I also ordered the new o-rings for the hub and wheel seals that go on the back of the knuckle between CV axle and wheel hub/bearing. I was glad I did because they were shredded on both sides, but the wheel seals were a pain in the ass to get seated. I had to use about 5 zip ties to hold it in place and help keep it from popping out as I tapped it in with a block of wood.
https://www.rockauto.com/en/moreinfo.php?pk=4584729&cc=1432865&pt=1860&jsn=33
https://www.rockauto.com/en/moreinfo.php?pk=11327376&cc=1432865&pt=1852&jsn=10&_nck=HllVxRCey1+2aVRDo41oQdTbcl3rxAmQeMcBm39t5kVc2IqyAbq5OQkLNJT7SMtKJw9gFzmv4qUQB6Kw706SeYhyi3kmEnkV8BFMI6hj6lubiK3aOlbiu+hnGn6kfFFq1EzE9lnGkYje+xMcFk8Fq3PxsLPFLIF74WpQUSBCCmxQp0oyD10a8cUsPTo+2eWEbYnV4hbiwEJb3FL8smRtXREQdVfI/2PpEgltyVxJhZ4HQsiGHTzve4YiuOEMJyNzZ3iQE5+kI8XL14kY4bsB7M0UTEgmDnArde/LqpsOjc0=

 

^^^

 

I’ve tried more expensive wheel bearings on my Tacomas , I just use box store wheel bearing assemblies and changes them out every two seasons, my trucks see washboard roads/mud for 6 straight months everyday. It’s just so easy to change them out , I just do it every two seasons and don’t have any issues

 

I am at about 156K on my 05 on the original wheel bearings. Guess I am overdo. Anyhow, so far, the head gasket is holding up also. Guess I am overdo there too.

 

Anything really, just don't get the cheap economy one..