Baja Designs Squadron R Pro Wiring

Hello all,

I am considering purchasing a set of Baja Designs Squadron R Pros and BD’s Toyota fog pocket mount kit.

https://www.bajadesigns.com/product...kofyfqc9KtjMmFfnDmL2xoCrRoQAvD_BwE&vid=149102

https://www.bajadesigns.com/product...kofyfqc9KtjMmFfnDmL2xoCrRoQAvD_BwE&vid=149102

However, I have not been able to find any online media covering the process of wiring the Squadron R Pros with the separate mount’s harness and want to make sure the items are compatible before purchasing.

Has anyone had any experience with this setup? Thanks

 

Did your truck come with any fog lights stock? I thought all ORs came with fogs.

If so, just use that wiring and splice in the new fogs (after you disconnect the battery).

This is what I did for some BD fogs a few years ago.

If you can't or don't want to do this, you'll need to pass the BD wiring harness through one of the rubber grommets that pass through the firewall and install the switch that comes with it wherever you can make it work, or a switch like those from CH4x4 in a blank space.

 

It is recommended to run a harness into the cabin rather than connecting to the fog light wiring. That would be the best way to do it.

Best,

Brahian Herrera | Forum Sales & Support
Email: brahianh@bajadesigns.com | Phone: (760) 560-2252 Ext 201