Oregon/Washington Craigslist Ads

Selling a set of brand new ark rubber splash guards for 2nd gen Tacoma. SE Portland

$80

https://arksplashguards.com/product...7UzUtNONBRa8_CEqE_cAA_xfB4DMOX1hqQWXfgC0BJ7xc

 

bumping this as well

 

Yep.

 

I am going to need a new bed soon as mine is starting to come apart at the seams. I wish yours was Impulse Red Pearl. GLWS.

 

Thanks man. Hopefully you find what your looking for.

 

If you're looking for flexible then Rally Armor flaps are what you want. The upper half of them are ABS with Polyurethane lower halves. Compare that with Rekgen and Roblox which are fully ABS.

 

You interested in shipping?

 

Please put me next in line. Thanks.

 

Mine: https://seattle.craigslist.org/tac/wto/d/tacoma-bfg-ko-r17-set-of-used/7841738763.html

Set of 5 BFG KO2 265/70R17 tires. Discount for TW peeps.

Aprox 40k miles, with ~60 tread life left. No pokes, tears or repairs. Rotated every 5k mi.

 

Any chance you can pick up in Portland?

 

I can if you cover shipping fee, local obviously a bit easier for me so might let them go to the local guy below you if I can.

 

Understandable. Let me know.

Should have added. I have no problem covering shipping but if he can grab them locally that’s completely understandable.

 

I'll be through SE Portland on Monday if they're still around. Happy to ship them to you Steelhead Bum or if it can wait a few weeks, can deliver them when I pick up my 3RZ Longblock from Sunwest in Medicine Lake when it's done.

Note: gone camping tonight so I won't be responsive the next 24 hours but will reach out and make a plan tomorrow (Sunday) night. Thx!

 

Anyone interested in a set of OEM bed cleats or OEM lugs? Lugs taken off at 11,000 miles. Cleats were installed for a couple months before I took them back off.

Willing to ship from 97760 with ground advantage via USPS commercial rates on buyers dime.

$10 + shipping



$10 + shipping

 

That is incredibly generous of you and I am very grateful you’d be willing to do that for me!

I couldn’t do that to you though. Knowing that you want these too and you’re the one putting in all the leg work to get these, it wouldn’t be fair for me to end up with them.

My original plan before I saw the fs add was a diy replacement. Pick up a sheet of .125” rubber from HD, trace my oems with a paint pen, cut em out, punch the mount holes and replace the oem push pins with stainless hardware and washers.

My only hang up is I am missing one of the four oem splash guards. The front passenger side unit. So I guess, does anyone happen to know if the driver side and passenger side are universal? My thought is I could trace the driver side front twice if they are.

 

there’s templates you can print in this thread and or maybe just see the difference.. not sure about Tacoma but when I did this DIY on T4R I think like the washer bottle on the passenger side made it a little different..



https://www.tacomaworld.com/threads...bay-splash-guard-rock-guards-template.621635/

 

Mine. 3.8 gallon waterport. Used about 10 times. Works as it should. $120 obo


currently $256 on Amazon

$257 WaterPORT 4.0 Gallon Self-Pressurized Water Tank for Camping Showers, Bumper Mount or Bed Mount Vehicle Water Storage for Trucks & Off Road Vehicles

https://www.amazon.com/dp/B07W44V1G3

 

Do you have the hitch mount?

 

Not OP seller but if he does not, I have one I'm not using. Will ship it to you free if you cover shipping cost. Does NOT include the additional mounting piece for the WP to slide in as I'm using that on my molle panel

 

I do. Was too lazy to grab it for the pix