What Have You Done To Your 4th Gen Today?

Actually have and is installed in picture

 

What brand is it? It doesn’t look like you have it installed at all. It looks stock

 

Triplealiners, so far I like it but it's only been 1 day.

 

Weird I looked at your photo several times and don’t see any liners.
Here is what my triple liners look like in the bed and tailgate

 

So, been working through this over the past few weeks as I got mine a month ago. I’ll need to list everything out below as the pics are a bit all over the place.
Bottom line I’m embarking on a 10-day camp/hike/bike trip to Utah in Sept, so plan to test things out over this summer in CO.

Here’s what I’ve added:
Kuat Ibex bed rack - installed half height
Kuat Piston SR bike rack
Decked Drawer
Roof Space RTT

Here’s what I’m planning to add…open to any suggestions that would support a 10-day trip.
Cargo Glide - two half slides to support camp cooking, coolers, etc.
Water and Fuel containers - not rotopax
Recovery gear
More lights
Some type of power distribution system that taps into truck power
Roof rack and Roam storage case - access to gear while up in tent?

 

Nice truck, but your garage!!!! Did your builder only drywall half of it and not paint it?

 

Tell me about it. That’s the next project. Here in CO, most builders don’t finish the walls in the garage that are exterior only, meaning not shared with interior space.

Kinda a good thing for me at least. Just bought the house two months ago, so now I can add electrical and insulation where I need it…less demo needed.

 

Yea that's code around here as well on an attached garage. Must be minimum 1/2" sheetrock on the adjoining walls and 5/8" on the ceiling (if living space is above) for fire rating. I just insulated and sheetrocked my garage recently and instantly could feel the difference.

 

What brand are your running boards? Thanks.

 

Fantastic I went with this route got to get a better pic

 

Put on an el cheapo tonneau cover
May put a topper on it later have not decided yet

 

You know, that would be a really nice wheel if it wasn’t a plastic cover.

 

I got to agree with you it may be cheaper but I like them better because they roll up and are out of the way giving you perfect access and visibility. I like this better than the trifold.

 

The Bluetti Charger 1 looks pretty awesome for charging power stations (brand doesn't matter, just the connection to the power station). You can leave it uninstalled and just hook it to the battery when needed (if you want to do it that way).

 

I wound up going with a BAK Revolver - it rolls up like a soft top, but is actually made of narrow aluminum panels. Kind of the best of both worlds, though it does still block about 40% of the height of the rear window.

 

Got the 5,000 mile complimentary service, sans oil change. Have to do that myself in the next couple days. Tires rotated, wipers checked, fluids checked tire pressure checked. They swapped out my factory spare with the new exact match full time spare I picked up a couple days ago. I'll put that one up on FB Marketplace & see what, if anything. I can get for it.

 

Yep, it sure would. It's one of the reasons I fell for the package. You can imagine how pissed I was when I found out the wheels had plastic covers.

 

Question - Would they be easy to pull off if I changed my mind one day or do they fit extremely tight??

 

So I looked at the picture I posted and dam..... you are right there is no liner...lol

 

Trumgeta