What Have You Done To Your 3rd Gen Today?

Mine did the same thing and I also just put a zip tie on it.

 

The lug nuts that came with the spacers are acorn style so they are quite deep.
Spacers were not completely torqued yet. Only about 2 threads showing.

 

Got it!

 

What’s the going rate for stock suspension on FB marketplace these days? From my 2020 OR with about 20k miles when removed.

 

500, 400, 300? I don't know...

I think i sold mine for one of those numbers, a while back, with 15k on them.

 

Noticed the damn trim strip on the roof popped up again (3rd time?) after the last attempt, using 3m weatherstrip adhesive. It didn't stick to the rubber well and was too thin to fill the gap. I'm done dealing with this, m12 caulk gun full of 3m windo weld go brrrrr.

 

Never coming off now.

 

Picture of the hose you guys are talking about?
Just looked at my coolant tank and it down to the low mark.

 

Finally got around to removing my step rails. Easy like Sunday morning.

Question for anyone who has done this: Did you put anything in the now-empty bolt holes? Trim plugs? Leave ‘em empty?

 

Chrome bumper delete! Went with a full replacement rather than bumpershellz. Feels more permanent than 3M tape

 

That looks good, I need to do that with mine. Where did you purchase the new bumper?

 

The tacos originally come with plastic trim screws that thread into those holes. I would just reinsert the bolts from the steps back in there with some grease on them

 

I got mine on ebay from Top Picker Auto. I got them for $120 a month ago but looks like the price increased https://www.ebay.com/itm/2833315371...Ay/XUtCCDberln1Bqu/z/PAJ8=|tkp:Bk9SR5ik6KXPZQ

 

Sweet, I just bought Lunar Rock

 

Stretched the legs. Only got out to take pics on the easy section

 

Great looking truck! What size tires and what suspension do you have?

 

Replaced a very annoying front drivers centre cap that was noisy as hell. Kept clacking all the time while in motion. Wasn’t as noticeable in the crappier weather but now that I’m driving with the windows down more often it’s relentless. I knew they were ridiculously priced for a simple pice of plastic so I put it off as long as possible. Replaced yesterday $91.00 after tax CDN. Purchased from local dealer.

No more annoying clacking.





I couldn’t find anything wrong with the old one pictured below. Was on firmly but would still rattle and clack.

 

What front bumper did you install?

 

Personally, maybe shorter bolts with grease on them , just to protect the holes and threads. I'm sure you could find plastic bolts if you went to a fastener store.

 

Nice Taco on Lava rocks...