4th gen - aftermarket wheel and tire pics

Oh yeah I love it! It looks aggressive.

 

Looking good.
Any chance of a side shot? You have done no lift, correct?

 

Correct stock suspension no lift.

 

Nice wheels. Do the tires rub when turned to full lock?

 

At full lock going in reverse it does rub very slightly. I trimmed some of the felt liner and adjusted it. Best of all I can kept the crash plate intact without issues.

 

-12. Updated the post, thanks.

 

Damn -12 is out there lol. Could you take a photo of the poke front and back when you have a chance.

 

@Ryan's Taco

I was wondering how the Replika wheels are holding up & if you're happy with them. I know they are the same offset as the OEM Off Road wheels, but do you have any front/rear photos showing the tuck/poke with the larger tires?

Thank you.

 

SCS Blaze10s +20, 285/70r17 Wildpeaks. Stock suspension.

I rubbed on the raised part of my "Canadian" flaps, trimmed that seems all good so far.

 

They are the exact same size offset just a 1/2 wider so it may be 1/4 of an inch out farther but nothing really to notice to much. If its past the flares we won't pass our yearly inspection and they are getting pretty strict with that.

 

Thanks. Do they seem to be decent quality, & are they pretty even with the flare?

 

Yep they are...Then I bought center cap trd stickers 64mm. I am happy with them so far
https://fastco.ca/replika/alloy-wheels?carmake=Toyota&caryear=2024&carmodel=Tacoma&carsubmodel=TRD Off Road&caroptions=S&wheelDiameter=17&wheelWidth=8

https://www.ebay.ca/itm/22655517676...3IRT8iAd/ScuBrtiA8gQP5jC5KQ=|tkp:BFBM_ruWx89l

 

Thank you, Ryan.