1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Hard Cover ARE LSII Longer Support Struts

Discussion in 'Tonneau Covers, Caps and Shells' started by Leathermanwave, Apr 30, 2025.

  1. Apr 30, 2025 at 6:13 PM
    #1
    Leathermanwave

    Leathermanwave [OP] New Member

    Joined:
    Jan 25, 2025
    Member:
    #464778
    Messages:
    1
    Gender:
    Male
    I got this 2010 short bed a little bit ago with an ARE LSII (LS2) 5140LS hard shell tonneau cover on it. Not entirely sure how I feel about the cover, but it is practical except I hated how little it opened. Since it looked like the gas struts were the only thing keeping it from opening further I got some longer replacements. I measured with the old struts off and just a bit over 20" seemed like the max length before I was fighting anything. Went with these Lift Supports Depot 19.7" 110lbs 10mm struts on Amazon.

    https://a.co/d/gQ0zMV2

    Turned out great, went from 22" of space above the tailgate to 32.5". So much easier to get things in and out. The 110lbs is definitely a little overkill though, it takes a decent amount of force to close but sure lifts up nice.

    20250430_202812-COLLAGE.jpg

    20250430_203055-COLLAGE.jpg
    PXL_20250130_000803580.jpg
     

Products Discussed in

To Top