Hazards and signal problem

Hello - new to forum. I have a 2012 SR5 Tacoma with 180,000 miles,
Currently turn signals and hazards aren't working. (no indicators on dash either- completely dead) Fuses and flasher relay are ok. any ideas? I do not have LED modifications

 

Does your truck have the amber daytime running lights?
If so do they work?

 

Yes my truck has the amber daytime running lights, and no they are not working.

 

Your IG1 (10A), TRN-HAZ (15A), and TOWING (30A) fuses are good?

 

I will check -could be towing since it appears I don't have brake, running lights or signals for towing.

 

all fuses check out ok.

 

Fuses checked by looking or by meter?

OE tow package or aftermarket wiring for trailer lights?

 

Checked by meter. OE tow package

 

checked by meter and oe tow package

 

Then you need to get to the flasher and check powers and grounds there.

Powers:

Pin 1 (Black/Yellow) always
Pin 3 (Pink) ignition on
Pin 11 (Grey) always

Grounds:

Pin 4 (White/Black) always
Pin 6 (Yellow) turn signal switch in the left turn position
Pin 7 (Light Green) turn signal switch in the right turn position
Pin 12 (White) hazzard switch on

 

thanks will check!