2019 Tacoma Bed Extender Template

Can someone point me to the correct template to install a factory Toyota bed extender on a 2019? I bought it used but it did not come with the mounting hardware. I searched online but could only find a template for a 2012. Not sure if it is the same or not. Even if someone could provide with with some measurements off their mounts that would be great! Thanks guys!

 

Attached

Trying to confirm it hasn't changed post 2012... stay tuned

 

Awesome...thanks!

 

OP, it looks like it'll be the same instructions, which makes sense... the bed is the same size (bed sides taller on 3rd gen).

 

Perfect! Thanks guys that was super quick!!

 

And for the future readers of this post, go here for the instructions and template (from AMP, who makes the extender for Toyota): https://tinyurl.com/y44e5klx

 

So how do you print the template ACTUAL SIZE for a 2017 tacoma sport

 

I can confirm the fitment is the same from the 2012 (second gen) instructions that Bert posted to the third gen.
Just installed the bed extender from my 2015 into my 2022 yesterday using those templates.
Your printer's default setting likely is to 'fit' and you need to switch that to 'actual size' before printing. That will produce the correct size templates.

 

Thank you for posting the template. It helped on my 2018. You guys rock!!!

 

The second post. Perfect pdf. Make sure when you are printing it, set the parameters to 100% scale because depends on the printer, might vary from 90% to 98% for instance, and you don't want to be off at all.

Once printed measure the dimensions. If off, just measure straight on the bed as it suggests in the installation manual.

Thank you a lot for the PDF. Life saver.

BTW applied to 2023 tacoma Off-road full cab. OEM bed extender. Bought it used for $100. No issues.

 

thanks! this worked for my 2021 TRD OR...