Might need a custom wire harness anyone know someone who can help wire one?

Hey guys I am working on a custom project for a Tacoma where I need to extend the length of two connector cables that go to the Shifter Box by just a few inches.

I have attached a picture of the connectors.

The part numbers on each one appear to be:

12366>PBT
90980-12366

and

>PBT<12954
90980-12954

Each one would basically be like an extension cord that has both male and female connectors on them so I can slide the shifter box down about 5 inches +/- or so.

I actually got some connectors off Alibaba.com and one of them seems to fit but the other one is not quite OEM and doesn't come out of the socket so well. Either way I was unable to successfully wire them up into the shifter without an error code coming on.

My questions is does anyone happen to have these connector parts and could possible make me this extension piece for me?

If you don't have the connector parts I could possibly ship you/meet up what I have and see if someone could help me wire them up to where I wouldn't get an error code.

If anyone has any recommendations or someone not just in social but anywhere on the forums who is a Wiz in this department would appreciate it.

 

I don't know anyone that can make you your one off custom harness.....

But you should have a good chance in finding all the plugs and pins with these two vendors.

https://connectorexperts.com/

https://www.corsa-technic.com/category.php?category_id=47

 

I err on the side of cutting and crimping new connectors that you can actually source easily. With that process, you can extend almost anything.

 

@daveeasa has made some custom harnesses.


Edit: My apologies. It looks like it's stopped

 

Try @Puppypunter, he makes head light harnesses.

https://www.tacomaworld.com/threads...esses-v2-most-current-thread-dec-2023.819431/

 

Just for our visitors from the future, these connectors are Sumitomo TS025 and Tokai Rika 025
https://www.uniquesystem-jp.com/phone/product/5300

https://www.uniquesystem-jp.com/phone/product/5299

https://www.uniquesystem-jp.com/phone/product/2162

https://www.uniquesystem-jp.com/phone/product/2160

 

Any chance you know what pins and where to buy? Im looking to adding a wire to one of my connector harness for my power seat

 

I am not sure about the seats, but if you can get me some good pics of the connectors you are wanting to tap, I can try to source it for you.

 

I could do that. I'll need to order the parts. I assume you live in Cali. I'm in Connecticut so shipping might be an issue.

 

It's actually on the driver side under dash..gues it's the 1h plug. Heres the connector i am referring to. Need to tap into lower left corner.

 

I’ll look into those, but I’m not hopeful. There are a couple I have found the females for on those, but no one makes the male. On my truck. I have two taps, both on wires from those type of connectors. And I go to great lengths to avoid those

 

For a 3gen there is a chapter in the repair manual (found linked around here sometines) of all the plugs and all the pins that go with the plugs. Invaluable time saver for locating plugs/pins.

 

not sure if this is the right one, but like this

https://www.tacomaworld.com/threads...anual-w-connector-and-terminal-part-s.470915/

 

Awesome. Going to take a look at it.