What Have You Done To Your 2nd Gen Tacoma Today?

Did you have steering wheel controls before the switch?

 

Yes I did

 

Man I like that. Simple with a subtle sport look. I need more details, how was the wiring?

 

turned on a couple more dash lights yesterday by removing the ABS unit. Replaced it with a couple of tees and an adjustable proportioning valve. brakes are already better, before tuning the front/rear bias.

 

It’s essentially plug and play for a 05-11 Tacoma.

The only difference is that the Matrix wheel has the horn ground plugged into the radio control connector, where on the Tacoma it is tied in with the cruise control connector. Easy fix you just swap over the Tacoma cruise control+cable to the Matrix wheel. The matrix wheel came with a cruise stalk but it has slightly different part number. It’s possible it may have worked and I could’ve just swapped over the Tacoma harness only, but I didn’t bother trying.

The airbag is from a 2010-2013 Matrix. They are very hard to find from salvage yards or eBay. The same steering wheel/airbag is found on the elusive 2010-2013 timeframe Corolla “S”. But those are even harder to find used.

Steering wheel is supposedly OEM surplus for a Matrix with an upgraded interior package.

I can’t remember the airbag part# but this is the type of airbag linked below. A standard corolla airbag won’t work so again, has to be either the Matrix airbag or a Corolla S for the sport wheel. I bought mine from Benzeen auto parts salvage yard for like $235 after making a counteroffer. They had only 1 in the yard.

https://airbagnation.com/products/2...Y6g87ExYDFvXGYyPapy9qyvOiXOral_MaAs_fEALw_wcB

Here is a link to the steering wheel:
https://www.ebay.com/itm/2325285231...oQpBoENSKq&var=&widget_ver=artemis&media=COPY

 

Took me all day, but I finally completed the Taco Chicken Roost mod


And, thought this was neat...

 

sweet fj trails. that blue ribbon metallic?

 

Did you plug it with something first before you put the JB on it? because that's impressive.

 

Yes plugged it with more JB Weld.

 

JB weld actually makes a product specifically for that

$17 J-B Weld 2110 Metal Fuel Tank Repair Kit, Gray

https://www.amazon.com/J-B-Weld-211...cint=&hvlocphy=&hvtargid=pla-4584138873800216

 

I thought about using that but didn't want to wait for it to come in the mail so just picked up some regular JB Weld at home depot. I wonder if it bonds any better or worse to our plastic gas tanks.

 

Thanks, and yes

 

Dropped my 2015 dclb today to get a 2 1/2 inch lift in the front and an 1 1/2 inch lift in the back.

 

Installed my ECGS bushing. It went much easier than I thought it would.

We’ll see if that roaring goes away.

 

Auto up/down switch for all 4 windows.

 

what they shop getting you for? my professional mechanic coworker wants to do full OME + dakars for me for $600

 

got winch isolator in and rigged up the hook (i dont want a flatlink or nipple after doing a bunch of research, just the OG hook) and this RC isolator is low profile unlike a lot of them

tensioning winch after work today, yew (ive wanted armor and a winch since my last t4r, going back 8ish years, had victory 4x4 hybrid bumper and warn 8s but sold it all before install when economy tanked in 2020 covid)

 

got rid of the S.A.I.S system today.
Bonus: found a pair of bent nose plies i lost sometime in the last 10 years.