OFFICIAL - 3rd GEN 275/70r17 Tire Thread

NO VIBES. I have E load and they ride really nice for a big tire

 

Been a few days with them so far they are definitely heavy i have noticed it on my morning commute took a bit of a fuel hit aswell. On the plus side i dont speed anymore. I am also tuned on OTT

 

Joined the club today

RH7s 17x8.5 -12 on AT4Ws

 

Falken Wildpeak AT4 275/70/17, 2" level and 17x8.5 0 offset Methods with no rubbing

 

Are those C or E load Toyos?

Any rubbing? What lift do you have?

I have 6112 with 2 inch lift and wondering if I'm going to be rubbing at full flex.

 

First long trip out on the 275 ko3s. I gotta say I’m impressed. Travelled some pretty rough roads and these tires are smooth running even at full pressure. They are a lot less jarring than the k02s I had in the same size. I don’t know if BFG engineered more comfort into these tires, but my impression is they are more complaint, even in the 10 ply. Traction was good for what I needed them to do, and no cuts or chips after some blast rock ascents and washed out sections of road. No regrets so far.

 

Stock UCA's?

 

Stock UCS's. Trying to find alignement specs but i cant find the paper. Alignment is nothing special. I put these wheels and tires on whatever factory spec alignement i had for the stock wheels and tires.

 

I have a question for you guys running 275/70/17's. I have Bilstein 6112's in the front at 10/8 with stock UC's. Im 2" higher in the rear than stock. I am currently running STMaxx's pizza cutters 235/85/16's. I found a great deal on marketplace for a set of RC 17x9 -12 offset with Falken Rubitreks 285/70/17's. I bought them and put them on and while they looked really, really good, they rubbed a little at the cab mount and just barely on the front flare at full turn. I sold them this afternoon for more than I paid for them as I don't want to do any serious cutting on the truck just yet. With my current set up can I run 17x8 -12 with 275/70/17's? I messed with the tire size calculator but I am still not sure.

 

stock coils on your 5100’s?

 

I like the Pokey on that wheel/tire set-up.

My Sport has Bushwacker Fendys AND I have the TRD 2" Lift Bilstein shocks with OEM springs and 1" block in the rear.

Maybe I'll go ZERO offset since you are getting rubbing in the front.