Anytime back up and front camera*not working*

wondering if somebody can help me troubleshoot the anytime camera. I bought anytime camera a couple of months ago and only the rear camera is working. I can't get a signal from the front camera.

 

Well Curtis, I have the same problem. 2019 sr trim level. Back works fine. Front camera. Not so much. I threw the radio back in heading to the dealer tomorrow. With a brake override light. I’m playing dumb.

 

Welcome To TW...

 

You too.

 

Was the installation ever completed? (meaning was it working at one point and recently stopped working?)

 

Mine hasn’t since install. Could be the ground or the connection. But I doubt it. One YouTuber put power to the red lead from the camera. has the same year as my truck, but upgraded radio ( different trim level) another guy doesn’t. Both work. But I tried both ways and got nothing. The rear camera works on demand so I am happy about that. The other issue is the override brake light I have now. That I was in the fuse box for the alternative wiring. I have an appointment tomorrow. Fingers crossed.

 

I followed the instructions to a tee. Also there is a grey and blue lead from my switch but nothing offered on my truck to use them. No leads

 

Did you contact the seller/mfg?

 

Not yet. I think I may be stuck with it

 

When you say "hasn't since install" I interpret that as installation was never successfully completed.

Check the 10 amp fuse under the hood labeled "STOP". My guess is either defective camera or the camera isn't wired properly.

 

Do you have the anytime camera with the low grade radio?
I didn’t mess with the stop fuse I did use the inj and the fuse next to it. But when I tried to just run my grill lights even they didn’t want to work. We will see what the dealer comes up with then I will recheck the connections. And lastly find an alternate power source. In the fuse box. Some wheres lol.

 

I will recheck the camera connection. It can only connect with the arrows aligned. Which they are.

 

Yes, I have the anytime back-up with front facing camera in a SR with a basic OEM head unit.

 

Well that’s a relief. I thought My truck was derailed because of the trim level. Now what do I tell the dealer? This happened out of the blue. Or did I do it messing with the tap a fuse? My thinking is I could have severed a wire in the harness in the firewall. But I used a blade with the edge away from the harness. But if the point snagged a wire. Then I am screwed.

 

It’s in the dealers hands now at least the tow will be free so I am told. Truck ( according to the vin) is still under warranty

 

And it is the ecu. It died. Not by my hand. Dealer is ordering a new unit. I pick up a loaner on Saturday