What Have You Done To Your 3rd Gen Today?

Sorry for the delayed response. This is an Iceco JP50 Pro 51.7quart fridge. I'll have to measure the slide when I get home but I'm guessing it's 16 to 18 inches wide. It's a little big for my fridge but works just fine.

 

Yes, I observed each twice before re-install.

Thank you Dave.

And, thank you @MGMDesertTaco !

 

Your passenger side is still hyper flashing when signaling after shifting to reverse. Did you install the resistors on both driver and passenger sides?

 

Your welcome...

Sooooo, how do ya like em now???

 

Yes. I remember double checking the connection before re-assembly, but I'm going to check it again tomorrow morning, it's too hot out there, and it's getting late by morning should be cool again.

 

Yes!! I like them now. haha. That's the way they should have been...

 

Looks like 2 of these bulbs were kapuey, and I didn't even know it. The VTails mod was timely.

 

So do they work now?? I have the meso custom. My signals hyper flash when 4 ways are on and in reverse. Otherwise all is normal. But brighter, and safer

 

Tapping out. It’s been a long assed Friday

 

Did you install the VLR-15 plug-in resistors to prevent hyperflash?
I'll have to check mine.
See if they flash.

 

That is great, I would really hate that I was one of the ones saying DO IT and it not work out for you, I don't take giving advise lightly....


I totally agree, I have changed every bulb out in the truck over to LEDs except for the front running/turn signal bulbs and the headlights, probably won't mess with the fronts run/turn bulbs cause I am not as worried about someone seeing them and I am happy with the H9 upgrades for the head lights...
Now the DRLs were already LEDs when I got the truck and I can see a little black box with a white label with LED written on it with some other words, so I really don't know if factory or upgraded before I got the truck... (but doesn't look factory to me anyway)....

 

It’s something “gatorback”. The material is nice quality the fit was/is still a partial fit. It was advertised as specific/oem fit but that wasn’t my experience. The holes didn’t line up on the inner mounts for the flap or the metal bracket, the front brackets had to be bent because the flaps rubbed on stock suspension and tires (still do at full lock on a bump). I had plans to revisit this because I didn’t install the bracket in the rear (only attached at the fender holes). I can hopefully address the rub with an alignment but I’m waiting till tires are a must

 

I lost a bamboo this winter but the replacement came in this week

 

Coffee and stare at my fifth mid life crisis

 

Yes

Thought I did.

100% now guys. 100%.

 

Installed eibach 2 inch lift springs onto my 5100s. Drivers side 2nd clip + 1/4 spacer and passenger side 1st clip, to account for taco lean. Truck looks great now, rear will be higher to add some rake when I get my Icon RXT Packs in next weekend.

 

Finally decided to install the Borla S-Type cat back exhaust. Picked it up locally for such a good deal I just couldn’t pass up on it.

 

I replaced mine with what I consider cheap struts already manufactured when I top 100 k I’ll man up with a set of bilsteins. Keep the spacer and section normal ride height.