Coming together

Since this truck was the face of tacoma world for a long time.i know many of you might be wondering where the restoration is at. I attached a before and after Pic.

My list is endless
Programmed 3 new fobs
New rack
New upper and lower control arms
New inners and outer tied rods
I dropped it from a 3 inch to 2 a because high articulate parts aren't cheap. Even working at Napa with a wicked discount lol
New front pads rotors and calipers
New cv axles
Rocker guard below the trim line
Upgraded to 285/70R17 tires. Had to shave the bumper about 4 inches on each side
New. As close to stock exhaust as possible
New head unit for the stereo
New blower motor, resistor and control module
New drivers seat
Added smoked tail lights to replace the stock clear ones. Headlights will soon follow
24 inch led light bar in the rear
2x 10,000 lumens fog lamps in the front
3 switch rocker panel switch for additional lights
Back up camera

This summer she's getting stripped down and repainted, yes the original speedway blue of course and rocker guard below the trim line. Along with rust prevention and under coating to try to salvage the frame before it's gone too far.

About to replace manifold gaskets, oil pan seal, crank case seal.

After that she just needs a windshield and it should be ready for a safety and turned officially over to me from MrBbrown

And for the record. I know people. I've only spent a total of 6k on this restoration thus far