Ontario BS Thread

Yo, that spoiler on the Grey buggy in background...man bun points?

 

is that like 1/8" plate? looks good.

 

I bought a Denso rad and a Continental serpentine belt tensioner for the 4Runner from Parts Avatar because they were notably cheaper than Wrench Monkey for whatever reason.

 

That’s my race car! Can spot my rocker panel repair using marine foam lol

18 gauge, I’ll have the sliders up tight against these new rockers. Going for maximum clearance.

 

Lulz...I filled in rocker panels on a 1979 Dodge Diplomat with newspaper and bondo with a spatula to make safety cert...good times

 

@blackgen2tacoma saw this while messing around on marketplace. Not sure if this is a good price or will work. Aluminum extrusion for anyone else building stuff.

 

Ive found, Case of aisin ws from rock auto to be not bad deal too

 

So far, the MotoMaster/Irving multi-vehicle ATF is working out well. It doesn't have that pleasant, fruity smell of the Genuine Toyota WS, however.

 

thanks. I since started the rack build after our chat at the meet. I have to ask my wife to message them because I don’t have Facebook. I found 5 pieces of 2080 for the main bars and now i need 3 more bars to complete it. 2 for the wind fairing and one for the rear to clear my satellite antenna. Do you remember how long of spacers you used to mount the rack it to the cab ?

 

If I recall they were an inch or so. Just enough to clear the roof rails so they didn’t rub.

 

OEM Mitsuba driver's front window regulator failed after 14 years in the Subaru. Replaced with Aisin P/N RPAF013:

 

Little do you know you just volunteered yourself for my rockers next!

 

Anyone know of some quiter beaches anywhere in the Buckhorn/bobcaygeon/Burleigh falls/Apsley area? This heat is quite literally killing me lol. I'll even take a coordinate down a trail!

 

Not the area you mention and I don't know if it's quiet (I sure hope so) but I'm going here this weekend : https://www.tacomaworld.com/threads/bancroft-trip-june-28-29.859983/#post-30694072

 

A little too far for a evening trip but I'll keep it in my back pocket for later, thank you

 

Didn't you drive 3 hours for a coffee meetup?

 

I've done that 15 times now!

Never on a work night like tonight

 

Any recs on windshields? Oem or aftermarket or aftermarket with oem mouldings.

 

My current one is aftermarket. It cracked after 2 years but it replaced OEM that cracked. So, a rock doesn't care who made it.