Ontario BS Thread

I don't know how I'd know that. Speedy Glass did it. But I don't know how well anything takes rock chips

 

^Lower left corner should have the glass mfr's name/logo. OEM is Pilkington at least in 2018.

 

Thanks for your help guys. I talked to my neighbours buddy who does windshields and he recs pgw with oem moldings. Going with him as the guy my shop uses now installs windshields with a welding mask and is a total butcher.

 

I just checked. It's PGW

 

anyone have a sway bar lying around, not the factory tacoma one but just one that looks like a big elongated "u" thanks ahead of time

 

Without dimensions, Best i got;

 

exactly like that but ...
Roughly 31" wide with around 12- 15 inch arms.
I took some measurements there rough but I'm just making things up as there is no option unless I want to pay over a grand for the anti rock sway bar. And I need 2 so most likely $2060. Can't afford that for sway bars. Have to look for a used option

 

Hard to find OEM straight sway bars for packaging reasons. Exceptions are vehicles like Jeep Wranglers and early-'90s GM half-tons. If you have access to a Jeep JK, take some measurements of the front sway bar to see if it'll fit.

Alternatively make your own with 4130 chromoly thick-wall tube, and rectangular tube as levers. The Currie Anti-rock is expensive because it's splined. If you're welding the levers to the tube, it's a lot cheaper.

 

Anyone want this 1/2 end gen front bumper with worki.g fog lights? Free come and get it please.

 

Maxsa Escaper traction boards on FB Marketplace for only $100 if anyone is looking for a set: These usually go for $250+tax:

$108 Maxsa 20333 Heavy-Duty Escaper Buddy Traction Mats for Off-Road Mud, Sand, & Snow Vehicle Extraction and Recovery, Bendable, Unbreakable, Orange, 2 Pack

https://www.amazon.ca/Maxsa-Innovations-20333-Escaper-Traction/dp/B00AV2HONS/

(I don't know the seller and can't vouch that he isn't a serial killer.)