2009 4 cyc 4wd can I run 285s?

I’ve had several Tacoma’s over the years but never a single cab 4 cylinder 4wd. I bought this truck last week from an older gentleman that’s had it since 2010. It currently has the spacer lift and has 265/75r16s. Will it clear 285s MTs and the motor turn them ok? This truck won’t be a daily driver just mainly used on my property and around town. Thanks

 

I don't know the answer but you can put tire sizes in the calculator here to get an idea of how much bigger they will be then do some measuring.
https://www.tacomaworld.com/tirecalc
IMO it looks good as is.

 

Well, I want to see this. Go for it.

 

Regearing the axles to match the tire size will help immensely with this.
Calculate from whatever the OE tire size was (found on the door placard) for the new tires. I suspect you'll be looking at something around 4.88:1 gears.

 

Stick? Sweet little single cab! Personally I wouldn't, unless you're fine with the added expense of a re-gear (X2). I run 265/70/17's on my 2.7/stick/access cab and it's fine. 4.10 factory geared I believe. A fairly taller (& heavier) tire would be pushing the limits of the 4 banger IMO. Nice truck!