Kings Coilovers and CBI Hidden Winch Mount

Hi All,

Has anyone installed both? I am curious how you handled the winch mount side support brackets and the reservoir mount? The CBI winch mount uses the sway bar bolt holes as a mounting location for side supports for their winch mount. These are the same holes that King uses for their reservoir mount and there is a built-in spacer to drop the sway bar. I know CBI makes the reservoir mounts for the Icons, but then I need a different sway bar drop spacer. Not a big deal, but if anyone has done it without going that route or welding, I'd love to hear it. Thanks!

 

FYI for anyone running into this, the side support brackets will fit under the King reservoir brackets. The bolts mounting the reservoir through the sway bar holes where tight, but they worked. I know the photo is crap, but I figure it would help someone down the line. The yellow lines are the side support brackets from CBI. They bolt into the frame where the red arrows are, the sway bar bracket bolts. The king brackets use the same holes. There is enough flexibility in the king reservoir mounts to make them both fit. Although it is a bit of pain to line things up. Get both bolts started before threading them into the recess of the king bracket or they won't line up. The purple dot is the through bolt on the CBI mount.

 

thanks for this post. I was planning to use the CBI brackets w/o the resi mount as I wanted to keep the king mounts. Do you re-install your sway bar? Were the bolts long enough with the support bracket installed?