Show off your garage or workshop!!

Thank you!

The name was actually something suggested in a thread I'm pretty active on

With all the support I've received from friends and members on this forum, there was no way I would pass it up so it stuck and now it's a real thing

 

Tv is mounted.

 

Very nice.

 

Annex to the main garage

 

So it was time to rip everything apart and change things up. Re-worked some electrical, insulated, and drywalled the outer walls.

This is kinda what it looked like inside before. Yes, I know I got a lot of crap!





Some demo from what the previous owner had had done.



Added some new outlets on its own circuit.



Insulation and strapping



Drywall





Paint





Trim, workbench, and shelving.

 

Recently mounted an old TV I had that was just collecting dust. Used the tractor and was able to do it by myself. I have a wireless receiver that picks up from the house (about 60' away) and boosts for Roku stick.



It was a bit "touch and go" there for a minute after I pulled the tractor away and the TV needed to be turned and lined up to the mount I made.

 

It's a busy one today!

 

Not much but it’s my room & it’s where the magic happens…

 

so much more organized. Once I get the goodwill and trash off of and from around the workbench it will be far better haha

added the overhead rack because all the holiday totes were getting annoying on the shelves around the edge.

 

EDIT - I am making some changes and need to figure out details for drawing a plan. Will make new post with new plans in a day or two.

Looking for input on designing a new workbench for the new house, will be made largely from 2x4 with 1/2 plywood for the top, a portion of the top will be 2x12 for mounting a vice. Top and bottom will be different parts which will slide and lock together so I can use the vice without worry. Total height will be 30 inches.
Top will be 5 feet x 2.5 feet with 1/2 plywood. Vice will be mounted on the 2x12 part which will hang off the side of the base.
Base will be height 29.5 x width 26.5 x length 42. The base is designed to be the same regardless of orientation. I may put shelf supports on the legs for removable shelves, I added these with the orange and blue highlighter marks.

 

which perspective is which?

i'm having trouble seeing whats top/side/front view.

and the top will be individual 12" sections that are replaceable?

 

I went down a bit of a rabbit hole last night, I am doing to do some small changes and then make a new post, will take a day or two. I will make sure to label what each view is.
The top will be a 30 inch by 60 inch 2x4 boxed platform with 1/2 plywood on top, with 2x4 braces laid flat ways at approx 12 inch intervals, one end will have a 2x12 as a brace for mounting the vice.