8 Gang Switch Panel - Auxbeam/Amazon

When I get home from work I could give you some rough measurements to get you started

 

That would be great. Thanks!

 

Here is a rough measurement of the tray I made.
I would cut it out of cardboard and trim as needed before making a metal one.

 

I used a piece of 12x12 ABS and cut it down. I could probably measure from the bend outward, but mine is a manual so it's different.

 

$96 MICTUNING P1s RGB 6 Gang Switch Panel, Multifunction Toggle Momentary Strobe Pulsed Switch Pod with Backlit Off 5 Level Brightness Circuit Control Relay System Box for Truck RV Offroad Marine

https://www.amazon.com/MICTUNING-Silicon-Brightness-Auxiliary-Momentary/dp/B0D99LJQ4F?crid=D7TW7884CTCS&dib=eyJ2IjoiMSJ9.vJctyGA9BBhjaAh2-MlcAKeZTRmH9s3l_Keuka_qmzruzxMmnzpP6tPdAFa_BBRsmXeI7qTIGposY063L7EPSTANE7G6wRdpz3FCggjAzL4VqNq4PUO-Nv1n2WhA4ZveVc4zTOv9obCyFh18wUwVCTvEpyyvpVPVtdmVavVBEzWpMpZv-EdAs8ZLBYubojbPRP4UfjOSdfHMIyjOz-eruCgSmWoidhVBTPtVsSBq1vs.sUmhUUcum2CRMDeKOKNzOqfuxrt0YtIqVqE8xQUrcRo&dib_tag=se&keywords=mictuning+6+gang&qid=1750109961&sprefix=mictuning+6+gang%2Caps%2C144&sr=8-1&th=1#averageCustomerReviewsAnchor


Anyone use one?
Mictuning
Feedback?
Need a 6 gang for the kids ranger....
I know some 8 gangs are cheaper but trying to keep the switch footprint as small as possible.
Not much mounting real estate......

$80, only seen a couple bad reviews but those were a while ago...
Have an auxbeam in the tacoma, but being hopeful that its all the same build quality...

 

192 ratings, and a 4.5 rating. might not be a bad option. not sure about the "new" panel. though but wish I had that I've been trying to find a spot to mount one in my other car and this would be much smaller a footprint

looks pretty close to this one

$170 Auxbeam RGB 6 Gang Switch Panel RA60 Auto-Dimmable Switch Panel w/Momentary Toggle Pulsed Memory Function, 12-24V Switch Panel for Truck UTV Car Boat Waterproof, 2-Year Warranty

https://www.amazon.com/Auxbeam-Auto-Dimmable-Momentary-Function-Waterproof/dp/B0D9BCVWJJ

 

I bet they all come from the same factory in China

 

I pulled the trigger!
I emailed them, asked a few questions, they quickly responded....
Same metal switch bezel just like auxbeam..
Same updated solid state fuse / relay box, just like auxbeam...
$80 vs $135, going for it!
Just for a single cab ranger to slowly throw some lights on there for him, starting with some 4" amber budget fogs in the stock location in the front bumper.

 

ive the nilight ones and been the same as my auxbeam stuff

 

Figured ide give an update....
From what I can tell, ide say Mictuning quality is just as good as Auxbeam.
Another added feature this has even though I dont force myself using it..
On the fuse panel, theres a toggle switch so if you decide you want the panel to operate with key off, you flip the switch.


Now im researching some Amazon amber cube ditch lights, will use in the factory fog slots in lower bumper valance...

 

Think I have a newer version of this panel but I made a fascia for it in my center console.

 

I've had great luck with Nilight Led, and not so expensive that if they get stolen im out a ton of cash

 

This works if installed correctly

 

Just bought the RB80 XL. looking for mounting options on the Early 2nd Gens.