OME 2886 gave me a 4” lift on passenger side?

Hey ya’ll, first post on this website and had some questions on my lift kit job going south!

Just a run down of what I’ve done. Installed Bilstien 5100’s on all four corners. Icon add-a-leaf in the rear and OME 2886’s in the front. The AAL gave me the 1.75”-2” lift I was looking for so that was a success. But in the front the OME 2886’s gave me 3.25” on the Drivers side and 4” on the passenger side. That is definitely something I wasn’t looking for, just wanted some insight on what could be cause this because they are advised as a 2”-3” lift. Everything was seated right in the top hats and on the bottom coil plate (I dunno what that’s called). Definitely worried about cv axle and upper control arm angles if this persists. Is this something that just needs time to settle? This is pre alignment btw.

 

Are the bottom buckets upside down? We see that a lot here. Pics of the coils will help.

The 2887s are intended for weight, so it will sit high without skids and a bumper.