1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2000 coil pack 3RZ-FE II3 Motor Harness Connector Pinout Help

Discussion in '1st Gen. Tacomas (1995-2004)' started by DesertRatliff, Jul 17, 2025 at 8:17 PM.

  1. Jul 17, 2025 at 8:17 PM
    #1
    DesertRatliff

    DesertRatliff [OP] Well-Known Member

    Joined:
    Jan 14, 2012
    Member:
    #70618
    Messages:
    2,458
    Gender:
    Male
    Mt. Hood, OR
    Vehicle:
    Mas Tacos Por Favor
    20250717_195255.jpg

    I've got the ECM wiring figured out and buttoned up from my 2000 coil pack 3RZ to swap into my 95.5 Tacoma but now I need to figure out the IK1 motor connector.

    There's about twice the wires on the motor connector compared with the cab harness and only one wire (pin 8) is the same color and function. All the others are different.

    [​IMG]


    [​IMG]

    I found a list of functions/pinouts for the 95.5 Tacoma on Pirate ( 3RZ swap wiring | Pirate 4x4 ) .

    Now...hoping someone had a similar list for a coil pack, 5 spd 3RZ which obviously has lots more wires? Thanks in advance!!
     
    Last edited: Jul 17, 2025 at 9:23 PM

Products Discussed in

To Top