Not much Tacoma left.. 4500 koh build

Think I got the last of the tubes in the rear and the rear bumper done. The interwebs told me the bumpstops would rip out of the frame so ran two tubes down that the bump can will weld to the back of.

Few other gusset tubes and some side pieces around the tire to give it a more complete look and a rear bumper. A 37 should sit just inside of it. It’s kicked up about 8*

 

And Seats showed up. Got that gator

 

Welded out the rear of the truck the best I could. I’m hoping when the body comes off I can roll it on the sides to do the bottoms instead of laying on my back. Got everything capped and got the radius tube gussets I want in on the back and front and got the ones for in the cab cut but I’ll wait till I weld all that out. And then milled the wilwood calipers ears to center the rotor.

this bolt got cut shorter after the picture

 

Did you ever see the on u-tube about the guy that used two engine stands to make a rotisserie?

 

I’ve seen a few different ones. I have two engine stands so maybe if I can make one with two plates bolted to the stands and some tube tacd from plates to the front and rear bumper I’ll do it. I imagine the car will be pretty heavy for that though and don’t want to spend a ton of time trying to make something