TPS

2003 Toyota Tacoma.
Just replaced the TPS, on the way to work Monday lost power trying to pass a SEMI. Still having the same issue of no throttle tell about 2/3 the way.
I tried:
Pulling the battery (15min) no luck.
Turn the ignition on, pressing the pedal to the floor and up 3 times. No luck.
Starting and letting idle no luck.

I still have a check engine light. Sensor 8945212040

 

What is the code?

 

Car Scanner ELM OBD2
Version: 1.118.0/1.118.0/iOS
DTC report
Connection profile: Toyota OBD-II / EOBD ü1999-2008 K-Line/KWP + extra sensorsDate: 7/7/2025 8:59:20 AM
============================
OBD-IIOBD-II
DTCs: 2
----------------------------
P2121 Ä0x2121Ñ
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch D - range/performance problem
Status: Confirmed
----------------------------
P2127 Ä0x2127Ñ
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch E - low input
Status: Confirmed
============================
ECU Address $6AECU Address $6A
DTCs: 2
----------------------------
P2121 Ä0x2121Ñ
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch D - range/performance problem
Status: Confirmed
----------------------------
P2127 Ä0x2127Ñ
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch E - low input
Status: Confirmed

 

Best I can do for now.
But have a mid level scan tool that can look at live data and OEM PIDS will help.

P2121 - http://www.markofshame.com/fsm/03_Tacoma/Repair_Manual/03tacoma/di/eg5vzfe/cip2121.pdf

P2127 - http://www.markofshame.com/fsm/03_Tacoma/Repair_Manual/03tacoma/di/eg5vzfe/cip21202.pdf

 

Replaced the TPS with an OEM or aftermarket?

 

On an 03 can you replace the TPS? I thought that wasn’t possible with ETCS

 

Okay this is pointing me in the right direction. The other issue is have noticed is when I gave toyota my Vin they referenced wrong part numbers for my truck. When I gave them the part number from the image I found online they told me the sensors weren't placed on my truck or they were only installed on the Tundra.

 

I have replaced the throttle position rod sensor but I still dont have the first 1/4 or my pedal press registering. I also still have the check engine light

 

This sounds more like the APPS than TPS. Pedal response is handled through the APPS, which then sends to ECM, then to throttle valve motor (under the TB), then the TPS reads if it is correct and reports back to ECM.

the APPS is the piece where the throttle cable attaches on the front of the TB. Could try disconnecting and cleaning contacts in the plug/connector to make sure it's not saturated or corroded.

I've heard somewhere that they need to be calibrated together which is why Toyota never sold them separately, always as part of the whole TB. But others have had success with just replacing the TPS with the Aisin part.

 

I’m experiencing the same thing. New TPS sensor should be here today. Hopefully that’s what it is and not the APPS

 

Changed the TPS sensor but it’s still going into limp mode and throwing a p2121