Auxbeam RGB 6 Gang and MXT275 GMRS Radio Clean Install Kit

Good evening everyone! Are you looking for an all-in-one solution to install your GMRS radio and Auxbeam 6 gang switch for this summer's adventure? Look no further!

$160 MXT275 MicroMobile GMRS 2-Way Radio

MXT275 and 6 Gang Switch Kit

This kit will come with everything you'll need to cleanly install a MXT275 underneath the shifter center console and replace the coin holder with my 6 Gang switch coin panel with a RJ45. The RJ45 tail will run through the back and can be easily tucked behind the carpet and center console!

The filaments used will be engineer grade filament for ultimate heat resistance!

All hardware included.

Final color for the MXT275 radio will be black and 6 Gang switch coin panel will be grey.






Auxbeam 6 Gang No Radio
If you decide you don't want radio and need a clean install, I do have this option as well! Mounted with

$7 3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)

3M VHB tape, it cleanly installs on the left side of the steering column.

The filaments used will be engineer grade filament for ultimate heat resistance!

All hardware included.

Final color will be black.





Auxbeam 6 Gang Engine Bay Plate

Now where is the Auxbeam 6 gang relay going to be installed? In the engine bay with my own design'd plate! The plate is 3/16" aluminum and will come with a vertical brace/bracket to keep the plate rigid.

All hardware for this plate will be 316 Stainless steel for ultimate resistance against the element and galvanic reaction from the aluminum!




I'm looking for folks that are interested in purchasing a set, PM if interested and early bird special pricing!

This kit is only for Automatics!

 

Nice!

 

That's a clean build - good job. If I was just starting out on my aux installs, I would absolutely use this method and that switch location.

 

This looks dope. Finally a use for that useless cubby.

Will you be offering mounting brackets for other midland radios too? Or is the 275 the only one that fits in that location.

Will the coin panel bracket take both sizes of 6 gang Auxbeam switches?

How much for just the Midland mount a Auxbeam coin panel mount? I already have something for under the hood.

 

PM'd!

 

3d scan markers included?? Jk

Free bump for the Super clean design!

 

Are you going to make a coin panel for a Switch pro?

 

Good afternoon! The one I modeled after is the RA60, I'm assuming the pro is the one with Bluetooth?

Reaching out to you!

 

CLEAN!

 

Thank you so much!!

 

Bump! Looking for a couple of folks that are interested in purchasing a set Early bird special pricing, PM or comment if interested!

 

How does the cover mount over the coin holder?

 

Good evening! The coin holder is removed and within its recess are thru-holes where my cover mechanically fastens to a metal plate, sandwiching part of the plastic console! It's pretty solid!

 

do you have anything for the rb80 XL

 

Good evening! Currently no, there has been a couple of requests for different models of AUXBEAM product that I do have que! I right now want to just focus on the release for the

$160 MXT275 MicroMobile GMRS 2-Way Radio

MXT275 radio and RA60 Auxbeam for now.