Broken tonneau cover latch

Is there a was to replace part for this or will i need to replace over or maybe try glueing it back

It’s on my 2018 Tacoma off-road

 

?

 

Me. I would try epoxy. Maybe run a few screws for reinforcement. If it doesn’t work there is always the replace it route.

 

I realize this is necromancing a thread, but this thread came up in a search for me a couple hours ago, so I thought I would add some info. It's not the same problem as OP, but it might help someone.

I went out to my '22 truck to get a tool from the bed this morning and when I pulled on the handle for the second panel release, I felt a 'pop' that was different from all the other times. The panel did not release, and the handle was now loose. Visions of broken plastic dancing in my head, I went directly to Tacoma World, because all the info is here.

On lunch, I opened the bed, crawled in to release the cargo straps, puled out the appropriate toolbox for the Torx drivers (T25 - security bit NOT necessary) and laid on my back to open the housing. Once I got it open, I was very happy to discover no broken plastic, just a cable that popped out of the retainer.